15in / 400mm Span
Same plan but printed at 50%
Fuselage
- F1 - 3mm ply
- F2, F3, F4 and F5 all 1.5mm balsa
- 1mm x 3mm for bracing
Wing
- Ribs 1.5mm balsa
- 1mm balsa for skinning and cap strips
Tail
- 3mm x 3mm for control surfaces
31in / 800mm Span
335 grams including 1000 Mah 3 Cell Lipo
Fuselage
- F1 - 3mm ply
- F2, F3 - 3mm balsa
- F4, F5 - 2mm balsa
- Sheeting (top, bottom, sides) - 2mm balsa
- Wing seat, 3mm balsa vertical grain
- Bracing inside the fuse 3x3mm balsa
Wing
The Airfoil is Eppler 168 15% width
- 2mm balsa for skinning and cap strips
- Ribs & sheer webbing 3mm balsa
- 5mm trailing edge
- 5mm balsa spars
- 9.5mm balsa leading edge
- Wing tips 5mm balsa
Tail
- 5x5mm balsa control surfaces, gussets and triangle bracing (hard would be better)
Wood Shopping List
- 2mm balsa (x4) - http://www.hangarone.co.nz/balsa-sheet-20mm-100mm-915mm-p-1742.html
- 3mm balsa (x5) - http://www.hangarone.co.nz/balsa-sheet-30mm-100mm-915mm-18-p-1746.html
- 5mm balsa (x2) - http://www.hangarone.co.nz/balsa-sheet-50mm-100mm-915mm-316-p-1750.html
- 9.5mm balsa (x1) - http://www.hangarone.co.nz/balsa-sheet-95mm-100mm-915mm-38-p-1755.html
- 3mm ply (x1) - http://www.hangarone.co.nz/birch-plywood-30mm-300mm-300mm-18-p-4309.html
