Based on suggestions by domain experts the wing should be built with zero dihedral: https://en.wikipedia.org/wiki/Dihedral_(aeronautics)
Wing Construction (2 piece, removable spar):
- Wing ribs, stab ribs & tips are 7~OF 3.0mm x 100mm x 915mm ~ 1/8”
- Spars are spruce/basswood 4~OF 9.5mm x 12.5mm x 915mm (3/8” x 1/2”)
- Center ribs where wings join 1~OF Poplar Plywood 3.0mm x 300mm x 300mm (1/8”)
Wing Construction (1 piece):
- Spar is balsa 1~OF 9.5mm x 12.7mm x 121.92cm (3/8” x 1/2” x 48”) cut into strips 9.5mm x 19 mm (3/8” x 3/4”)
Fuselage Construction:
- TBA
Size Conversions
Downloaded Plans (outerzone)
- Senior_Telemaster_oz5044.pdf
- Senior_Telemaster_oz5044_review.pdf
- Senior_Telemaster_oz5044_article.pdf